beautypg.com
Cleaning the Drum
If there are streaks or spots on your print, the Organic Photo Conductor (OPC) drum of the toner cartridgemay require cleaning.
Before setting the cleaning procedure, make sure that paper is loaded in the paper tray.
1.
Press
2.
The first available menu item, "Clean Drum", displays on the bottom line.
Press twice.
3.
The display confirms your selection.
The multi-function printer prints out a cleaning page. Toner particles on the drum surface are affixedto the paper.
If the problem remains, repeat steps 1 through 3 until toner particles are not affixed to the paper.
4.
Printing When Toner is Low
When the toner cartridge is nearly empty, the multi-function printer saves the incoming faxes in the memorywithout printing them. If you want to print the fax when toner is low, you can set the multi-function printerto continue printing even though the print quality is not as good.
Press the scroll button ( or ) until "Ignore Toner" appears on the bottom line and press .
Press the Scroll button ( or ) to select "On" or "Off".
Select "On" to continue printing the incoming faxes in the toner low status.
Select "Off" to stop printing when the toner cartridge is nearly empty. This is the default setting.
Press to save the selection.
Ordering Supplies
You can order supplies using the Dell™ Toner Management System or the Dell Printer Configuration WebTool.
