beautypg.com

Installing the mezzanine card (10 gbe lan), Ws. see figure 3-16 – Dell PowerEdge C1100 User Manual

Page 79

background image

Installing System Components

79

Figure 3-16. Removing and Installing the Mezzanine-Card Cover (10 GbE LAN)

Installing the Mezzanine Card (10 GbE LAN)

1 If you are installing a mezzanine card for the first time, remove the

two screws securing the mezzanine-card cover and remove the cover.

See Figure 3-16.

2 Align the spacer pins on the mezzanine card with the holes on the system

board.

NOTE:

The three spacer pins must be inserted through the board for proper

installation of the mezzanine card.

3 Secure the board using the screw. See Figure 3-15.
4 Replace the riser card assembly. See "Installing the Expansion-Card Riser"

on page 70.

5 Replace the cooling shroud. See "Installing the Cooling Shroud" on

page 57.

6 Replace the system cover. See "Closing the System" on page 56.
7 Reconnect the system and peripherals to their electrical outlets, and turn

on the system.

1

back panel

2

mezzanine-card cover

3

screws (2)

1

2

3

book.book Page 79 Tuesday, February 26, 2013 11:33 AM