Dell PowerEdge C1100 - Manual (Page 22)

22 About Your System
Table 1-7. System Identification Indicators
Table 1-8. Power Indicator Codes
Table 1-9. Fault Indicator Codes
System Identification Indicator Condition
Steady blue IPMI using chassis identify command on or
ID button press identification on.
Blinks blue blinking Only IPMI using chassis identify command
blink on.
Blue off IPMI using chassis identify command off or
ID button press identification off.
Power Indicator Condition
Steady green Power supply is on (AC OK/DC OK) or in
standby mode (90–264 VAC)
Steady yellow Power supply faulty
(UVP/OVP/OCP/SCP/OTP/Fan Fault)
Yellow off Power supply is off or AC input
voltage is out of normal operating range
(90 VAC–264 VAC)
Fault Indicator Condition
Amber blinking System failure
or
Non-critical failure: non-critical fan,
voltage, temperature state, or CPU thermal
trip.
Amber off No system failure
or
Off
book.book Page 22 Tuesday, February 26, 2013 11:33 AM