Dell PowerEdge C1100 - Manual (Page 57)

Installing System Components 57
Figure 3-6. Removing and Installing the Cooling Shroud
Installing the Cooling Shroud
1 Align the cooling shroud around the sides of the heat sink and along the
memory slots and lower it into the system. See Figure 3-6.
2 Close the system. See "Closing the System" on page 56.
3 Reconnect the system and peripherals to their electrical outlets and turn
on the system.
1 memory module 2 cooling shroud
2
1
book.book Page 57 Tuesday, February 26, 2013 11:33 AM