Dell PowerEdge C1100 - Manual (Page 43)

Using the System Setup Program 43
Boot Menu
Boot Settings Configuration
Option Description
Boot Settings
Configuration
Configures the settings during system boots.
Boot Device Priority Specifies the boot device priority.
Hard Disk Drives Specifies the boot device priority sequence from the
available hard drives.
CD/DVD Drives Specifies the boot device priority sequence from the
available CD/DVD drives.
Network Device Specifies the network device.
Option Description
Quick Boot
(Enabled default)
Enables you to allow BIOS to skip certain tests during the
POST, which decreases boot up time.
Quiet Boot
(Disabled default)
Enable or disable quiet boot.
Disabled: displays normal POST messages.
Enabled: displays OEM logo instead of POST messages.
AddOn ROM Display
Mode (Force BIOS
default)
Enables you to display mode controlled by BIOS or addon
ROM.
Bootup Num-Lock
(On default)
Enables you to set the state of the keyboard keypad on boot.
On: The keypad functions as a keypad.
Off: The keypad functions as auxiliary cursor movement
keys.
Wait For 'F1' If Error
(Disabled default)
Enables the system to prompt you to press F1 if an error
occurs. This enables you to view the error.
Hit 'F2' Message Display
(Enabled default)
Enables the system to prompt you to press 'F2' to enter the
BIOS Setup Utility.
Force PXE First
(Enabled default)
Enables forced network boot (PXE).
book.book Page 43 Tuesday, February 26, 2013 11:33 AM