Dell PowerEdge C1100 - Manual (Page 33)

About Your System 33
Beep Codes
The following table describes the beep codes that are used in boot block:
8301 Yes Not enough space in
Runtime area!
SMBIOS data will
not be available.
See "Troubleshooting System Memory"
on page 107.
If the problem persists, see "Getting
Help" on page 123.
8302 Yes Not enough space in
Runtime area!
SMBIOS data will
not be available.
See "Troubleshooting System Memory"
on page 107.
If the problem persists, see "Getting
Help" on page 123.
8601 Yes Error: BMC Not
Responding
Remove AC power to the system for
10 seconds and restart the system.
If the problem persists, see "Getting
Help" on page 123.
8701 Yes Insufficient Runtime
space for MPS data.
System may operate
in PCI or Non-MPS
mode.
Remove AC power to the system for
10 seconds and restart the system.
If the problem persists, see "Getting
Help" on page 123.
Number of Beeps Description
1 No media
2 Boot-block bios file absent
3 Insert next diskette in A:
4 Flash program successful
5 Read file error
7 No flash present
8 Floppy controller error
10 Flash erase error
11 Flash program error
Code Log in BMC Error Message Corrective Action
book.book Page 33 Tuesday, February 26, 2013 11:33 AM