Dell PowerEdge C1100 - Manual (Page 44)

44 Using the System Setup Program
Server Menu
NOTE: Delay Time, Minimum time, and Maximum time are only shown in SETUP
screen when AC Power Recovery Delay is set to User define. The selection of
Restore on AC Power Loss setup to Power-on or Last State takes 60 seconds for
running BMC initialization after AC Power on.
Option Description
Status of BMC Displays the status of BMC.
IPMI Specification
Version
Displays the BMC supported IPMI version.
BMC Firmware Version Displays the firmware version of BMC.
Set BMC LAN
Configuration
Input for Set LAN configuration command.
Remote Access
Configuration
Configures remote access.
Restore on AC Power
Loss (Power Off default)
Restores the AC power setting. The options are Power
Off, Power On and Last State.
Power Staggering
AC Recovery (User
Defined default)
Selects the time of system power on after BMC initiates.
Immediate: powers on directly after BMC initiates.
Random: randomly selects time to power on.
User define: allows the user to select the time.
Power On Delay Displays the AC power recovery delay time.
View BMC System
Event Log
Displays all events in the BMC System Event Log.
Clear BMC System
Event Log
Clears all events in BMC System Event Log.
Event Logging
(Enabled default)
Enables or disables BIOS to record Event Logging.
ECC Event Logging
(Enabled default)
Enables or disables ECC Event Logging.
PCI Error Logging
(Enabled default)
Enable or disable PCI Error Logging.
book.book Page 44 Tuesday, February 26, 2013 11:33 AM