beautypg.com

Latch assembly removal: dell™ inspiron™ 7500 – Dell Inspiron 7500 User Manual

Page 65

background image

Back to Contents Page

Latch Assembly Removal: Dell™ Inspiron™ 7500

To remove the latch assembly, follow these steps:

1. Disconnect the LED cable from connector JP2 on the LED board.
2. Remove the 4-mm screw securing the LED board to the plastic base.
3. Remove the LED board.
4. Remove the (2) 4-mm screws holding the latch cover for the MegaBay™ and Media bay.
5. Remove the latch cover.
6. Remove the center lock over the 2 latches with springs.
7. Remove each spring and latch.

Be careful not to lose the small springs.

Back to Contents Page