Dell Inspiron 7500 - Manual (Page 102)

Back to Contents Page
Processor Board Removal: Dell™ Inspiron™ 7500
****New artwork pending
This procedure assumes that you have removed the heat exchanger/fan . To remove the processor board, follow these steps:
1. Remove the (3) 5-mm screws securing the processor board to the system board.
2. Gently pull the processor board off of connector JP15 on the system board. Do not rock the board to remove it, because this may damage
the connectors.
When reinstalling the processor board, align the board with the notch on the system board connector. Press down on the left side of the board over
the system board connector. This is the best spot to apply pressure to seat the processor correctly on connector JP15.
Back to Contents Page