Dell PowerVault DR6000 - Manual (Page 150)

Installing the RDA with OST Plug-In for NetBackup on Windows
This topic describes how to install the RDA with OST plug-in on a media server running the supported Microsoft
Windows server operating system software (and using the NetBackup DMA).
Ensure that you have downloaded the RDA with OST plug-in installer into the correct directory on the designated media
server. The plug-in installer is saved as DellOSTPlugin64–xxxxx.msi (for 64–bit operating systems), or DellOSTPlugin-
xxxxx.msi (for 32-bit operating systems). Ensure that the correct plug-in is downloaded to support your 64-bit or 32-bit
system.
1. Stop the NetBackup services if they are running, by using the following command:
$INSTALL_PATH\VERITAS\NetBackup\bin\bpdown.exe
2. Run SETUP to install the plug-in.
3. Check that the plug-in is installed by using the following NetBackup command on the Windows media server:
$INSTALL_PATH\VERITAS\NetBackup\bin\admincmd\bpstsinfo.exe -pi
This NetBackup command lists the plug-in details, as shown in the following example:
• Plug-In Name: libstspiDellMT.dll
• Prefix: DELL
• Label: OST Plug-in that interfaces with the DR Series system
• Build Version: 9
• Build Version Minor: 1
• Operating Version: 9
• Vendor Version: Dell OST plug-in 10.1
4. Start the NetBackup services by using the following command:
$INSTALL_PATH\VERITAS\NetBackup\bin\bpup.exe
Uninstalling the RDA with OST Plug-In for Windows
Use the following process if you need to uninstall the RDA with OST plug-in from a Windows-based media server.
Use the standard Microsoft Windows uninstall process to uninstall the RDA with OST plug-in from a Windows-based
media server.
NOTE: Dell recommends that you retain the RDA with OST plug-in installer on the media server in case you need to
use it to reinstall the plug-in.
1. Click Start, and click Control Panel.
The Control Panel page is displayed.
2. Under Programs and Features, click Uninstall a program.
The Uninstall or change a program page is displayed.
3. Locate the RDA with OST plug-in in the listed of installed programs, right-click and select Uninstall.
The Programs and Features confirmation dialog is displayed.
4. Click Yes to uninstall the plug-in.
150