Dell 3110cn Color Laser Printer - Manual (Page 387)

Length: 98.0 to 355.6 mm
MxNin
Feed paper from the tray loaded with MxN inches defined by users.
Possible range specified:
Width: 3.00 to 8.66 inches
Length: 3.86 to 14.0 inches
If this option is not specified or the tray specified is not available, feed paper from the default tray.
-t
Turns on the save toner mode for printing. The print result will be fainter than that of normal printing.
In some cases, this option will be ignored.
-r
Rotates the image by 90° and uses the paper in the landscape orientation.
-n
Disables the addition of the showpage. It is used when files converted to the PostScript language
program are merged with files created with other applications.
-l=left,bottom
Specifies the print position. Printing will be executed from the left and bottom of the page. The default
is 0.25 inches for both left and bottom.
-s=width,height
Specifies the output size. Printing will be executed with the width and height in inches.
-S=width
Sets the width of the output size in inches. The height will be calculated automatically according to the
width.
-E
This function turns on the image enhancement function. In some cases, this option will be ignored.
-Nc=copies
Specifies the number of output copies (the value of copies must be a positive integer).