Dell 3110cn Color Laser Printer - Manual (Page 37)

System
Settings Printer Name Specifies the name of the printer up to 31 alphanumeric characters.
Location Specifies the location of the printer up to 63 alphanumeric
characters.
Contact Person Specifies the contact name, number, and other information of the
printer administrator and service center up to 63 alphanumeric
characters.
Administrator E-
Mail Address Specifies the contact address of the printer administrator and
service center up to 63 alphanumeric characters.
Asset Tag Number Enter the asset tag number for the printer.
EWS
Settings Auto Refresh On Refreshes the contents of the status display pages automatically.
Off Does not refresh the status display pages automatically.
Auto Refresh
Interval Sets the time interval for refreshing the contents of the status
display pages automatically from 15 to 600 seconds.
NOTE: The auto refresh feature is effective for the contents of the Top Frame, Printer Status page,
Job List page, and Completed Jobs page.
Port Settings
Purpose:
To specify whether to enable or disable printing ports and management protocol features.
Values:
Ethernet
*
1
Ethernet
Settings Auto Detects Ethernet transmission rate and the duplex settings
automatically.
10BASE-T
Half-Duplex Selects 10Base-T Half-Duplex as the default value.
10BASE-T
Full-Duplex Selects 10Base-T Full-Duplex as the default value.
100BASE-TX
Half-Duplex Selects 100Base-T Half-Duplex as the default value.
100BASE-TX
Full-Duplex Selects 100Base-T Full-Duplex as the default value.
Current Ethernet Settings Displays the current settings of Ethernet.
MAC Address Displays the printer's MAC address.
Port
Status LPD Select the check box to enable the LPD.
Port9100 Select the check box to enable the Port9100.