Dell 3110cn Color Laser Printer - Manual (Page 210)

See " Accessing Held Jobs From the Operator Panel "
Disk Full
016-980
Job too Large
Press
RAM disk memory is full
and cannot continue
processing the current
print job.
· Press to clear the message, cancel the current
print job, and conduct the next print job, if any.
· Press Cancel to cancel the print job.
· Press Menu to open Stored Print and delete the
current job.
· To avoid this error in the future, do the following:
· Reduce the number of print pages such as
splitting the print data.
· Increase free memory space by deleting
unnecessary data in the RAM disk.
See " Accessing Held Jobs From the Operator Panel "
PDL Request
016-720
Data Violation
Press
Error relating to PDL
emulation problems
occurs. · Press to clear the message, cancel the current
print job, and conduct the next print job, if any.
· Press Cancel to cancel the print job.
Invalid Job
016-799
Data Violation
Press
When the configuration
of the printer on the
printer driver does not
conform to the printer
you are using, this
message appears. · Press Cancel to cancel the print job.
· Press to clear the message, cancel the current
print job, and conduct the next print job, if any.
· Make sure that the printer configuration on the
printer driver conforms to the printer you are using.
Ready to Print
193-700
Non-DELL Toner
Installed
The printer is in the
custom print cartridge
mode. Though some of the print cartridges reach the end of
their lives, you can continue printing.
Over Heat
042-700
Cooling down
Please Wait...
Since it is abnormally
hot inside the printer,
printing is paused. Wait for a while with the printer on until the error
disappears.
Ready to Print
142-700
Over Heat
Turned Halfmode
Since it is abnormally
hot inside the printer,
the print speed
decreases. Do not start another print job until the warning
disappears.