Dell 3110cn Color Laser Printer - Manual (Page 104)

4.
e.g.: http://168.254.1.1
Create wireless setting of the printer on Dell Printer Configuration Web Tool. 5.
Reboot the printer. 6.
Restore the wireless setting on your computer. 7.
NOTE: If your computer provides a wireless LAN adapter tool, change the wireless settings using this
tool. Or you can change the wireless settings using the tool provided by the operating system. See the
instructions below.
Select Network Connections from Control Panel. a.
Right-click Wireless Network Connection and select Properties. b.
Select Wireless Network tab. c.
Make sure the check box for Use Windows to configure my wireless network settings is
checked. d.
Click Advanced. e.
Do either of the following: f.
When wireless ad-hoc mode is set to the printer:
Select Computer to Computer (ad hoc) networks only and close the Advanced dialog box.
When wireless infrastructure mode is set to the printer:
Select Access point (Infrastructure) networks only and close the Advanced dialog box.
Click Add to display Wireless network properties. g.
Enter the setting that you send to printer and click OK. h.
Click Move up to move the setting to the top of the list. i.
Click OK to close the Property dialog box. j.
NOTE: WhenWhen your operating system is earlier than Windows 2000, create settings
according to the manual of the wireless setting tool provided by your wireless device
manufacturer.
For Fixed IP network:
Create wireless setting of your computer following the steps below. 1.
a.