Dell 3110cn Color Laser Printer - Manual (Page 351)

Delete the interface program files of Selected printer type name from /usr/lib/lp/model.
Please also delete the interface program files of Selected printer name from /etc/lp/interfaces. 4.
Delete all the directories that contain the UX filters and the files in these directories created during the
installation. The following directories must be deleted.
/usr/local/dellbin3110
5.
Delete the filter description files. Delete the following files from /etc/lp/fd.
Filter description files for various printers.
dell3110cn.fd (for Dell™ Color Laser Printer 3110cn)
download3110.fd
postio3110cn.fd
posttxt3110cn.fd
6.
HP-UX
Delete the printer that was registered with the system. Use the sam command to delete the printer set
up during the installation.
# sam
1.
Delete all the directories that contain the UX filters and the files in these directories created during the
installation. The following directories must be deleted.
/usr/local/dellbin3110 (directory specified during the installation)
2.
Printing and Using the Utilities
Printing (Linux)
This section provides information on printing with the filter.
To print, specify the printer registered with /etc/printcap as the output destination.
Printing From Linux
To print to the default printer:
If the printer is registered as the default printer, the name of the printer can be shortened and
specified as shown in the following example.
% lpr filename