Dell 3110cn Color Laser Printer - Manual (Page 341)

In addition, it can also be used in an environment where a printer, installed with an interface board, is
connected directly to the network.
Before Using UX Filter
Check the following items before using the UX filter.
Before setting up the workstation, set up the printer as follows.
Make sure the lpd port is working or not when using the network environment. If the lpd port is not
working, set LPD to On on the operator panel. (Mandatory) See "
Protocol " for more information.
1.
When a parallel or USB port is to be used, make sure these are working. (Mandatory)
Set up IP address and subnet mask when the printer is used in the network environment. (Mandatory) 2.
Make TBCPFilter function available if TBCPFilter function is installed on the printer. See " Adobe
Protocol " for more information.
3.
Installing the UX Filter