Dell PowerEdge R905 - Manual (Page 89)

Installing System Components
89
Figure 3-15. Installing a USB Memory Key
5 Close the system. See "Opening the System" on page 67.
6 Reconnect the system to power and restart the system.
7 Enter the System Setup program and verify that the USB key has been
detected by the system. See "Using the System Setup Program" on page 45.
TOE/iSCSI Key (Optional)
TOE, iSCSI, and other future functionalities for the system’s integrated NICs
are enabled by installing an optional NIC hardware key in the TOE_KEY
socket on the system board.
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 USB memory key 2 USB memory key connector
1
2