Dell PowerEdge R905 - Manual (Page 70)

70
Installing System Components
Figure 3-4. Removing and Replacing a Cooling Fan
Replacing a Cooling Fan
NOTE:
The procedure for installing each individual fan is the same.
1 Ensure that the fan handle is upright and lower the fan into its retention
base until the fan is fully seated. Then lower the fan handle until it snaps
into place. See Figure 3-4.
2 Close the system. See "Closing the System" on page 68.
1 fan 2 latches (2)
3 fan power connector 4 fan-bay power connector
5 FAN4 6 FAN2
7 FAN1 8 FAN3
1
2
3
4
8
6
5
7