Dell PowerEdge R905 User Manual
Page 23
About Your System
23
E122A
CPU # VTT
Processor # VTT voltage
has exceeded the
allowable voltage range
See "Getting Help" on
page 181.
E122D
CPU # VDDIO
Processor # VDDIO
voltage has exceeded the
allowable voltage range
See "Getting Help" on
page 181.
E122E
CPU # VDDA
Processor # VDDA
voltage has exceeded the
allowable voltage range
See "Getting Help" on
page 181.
E122F
2.5V PwrGd
2.5V voltage regulator has
failed.
See "Getting Help" on
page 181.
E1231
1.2V HTCORE
PwrGd
1.2V HTCORE voltage
regulator has failed.
See "Getting Help" on
page 181.
E1232
VDD 12V PS#
PwrGd
The specified power
supply has failed or has
been removed from the
bay while the system
was on.
If removed, reinsert the
power supply into the bay
and reconnect to power.
For component failures,
see "Getting Help" on
page 181.
E123B
LOM Mezz
PwrGd
Voltage regulator for the
NIC daughter card has
failed.
Recycle power to the
system or clear the SEL. If
the problem persists, see
"Getting Help" on
page 181.
E123C
Planar LOM
PwrGd
Voltage regulator for the
integrated NIC has failed.
Recycle power to the
system or clear the SEL. If
the problem persists, see
"Getting Help" on
page 181.
E1310
RPM Fan ##
RPM of specified cooling
fan is out of acceptable
operating range.
See "Troubleshooting
System Cooling
Problems" on page 157.
Table 1-7.
LCD Status Messages (continued)
Line 1
Message
Line 2
Message
Causes
Corrective Actions