Dell PowerEdge R905 - Manual (Page 140)

140
Installing System Components
Figure 3-35. Removing and Installing the Power Distribution Board
Installing the Power Distribution Board
1 Position the three retention slots on the power distribution board with the
three retention tabs on the bottom of the chassis. See Figure 3-35.
2 Secure the power distribution board with the seven screws.
3 Install the system board. See step 4 through step 14 in "Installing the
System Board."
4 Install the power supplies. See "Replacing a Power Supply" on page 74.
1 retention notches (3) 2 power distribution board
3 screws (7) 4 retention tabs (3)
1
4
3
2