Dell PowerEdge R905 - Manual (Page 76)

76
Installing System Components
Figure 3-7. Installing and Removing a PEM
NOTICE:
Use two hands to lift the PEM from the chassis.
4 Lift the PEM from the chassis.
5 If you are removing a 4-processor PEM, carefully turn the PEM upside down
and rotate the handle so it is in the closed position, before placing the
PEM on a work surface. See Figure 3-8.
1 processor expansion module 2 handle
3 guide pins (6) 4 slots (6)
2
3
1
4