Dell PowerEdge R905 - Manual (Page 121)

Installing System Components
121
Figure 3-27. Removing and Installing the Control Panel
Installing the Control Panel
1 Insert the control panel assembly display module into the chassis cutout
and secure it with the two Torx screws.
2 Affix the control panel label to the display module.
3 Install the control panel board in the system chassis and secure with the
three Torx screws. See Figure 3-27.
1 display module 2 display module cable
3 control panel board 4 control panel board cable
5 control panel board screws (3) 6 display module label
7 display module screws (2)
3 4
5
6
7
1
2