Dell PowerVault DR6000 - Manual (Page 10)

Memory indicator
Condition Corrective Action
The indicator
blinks amber if a
memory error
occurs. See the system event log or system messages for the
location of the failed memory. Reinstall the memory device.
If the problem persists, see
Getting Help .
PCIe indicator
Condition Corrective Action
The indicator
blinks amber if a
PCIe card
experiences an
error. Restart the system. Update any required drivers for the PCIe
card. Reinstall the card. If the problem persists, see
Getting
Help .
Hard-Drive Indicator Patterns
The following topic describes the hard-drive indicator patterns of the Dell DR6000 system.
Figure 2. Hard-Drive Indicators
1. hard-drive activity indicator (green) 2. hard-drive status indicator (green and amber)
NOTE: If the hard drive is in Advanced Host Controller Interface (AHCI) mode, the status indicator
(on the right side) does not function and remains off.
Drive-Status
Indicator Pattern
(RAID Only) Condition
Blinks green two
times per second Identifying drive or preparing for removal
Off Drive ready for insertion or removal
10