Dell PowerVault DR6000 - Manual (Page 107)

8
System Messages
System Error Messages
System messages appear on the monitor to notify you of a possible problem with the system. These
messages refer to events recorded in the System Event Log (SEL). For information on the SEL and
configuring system management settings, see the systems management software documentation.
NOTE: If you receive a system message not listed here, check the documentation of the application
that was running when the message was displayed or the operating system's documentation for an
explanation of the message and recommended action.
NOTE: In some messages, a particular system component is identified by name (“”)
component number (“”), or location (“bay”).
Error Code Message Information
AMP0302
Message The system board <name> current is greater than the upper
warning threshold.
Details System board <name> current is outside of the optimum
range.
Action
1. Review system power policy.
2. Check system logs for power related failures.
3. Review system configuration changes.
4. If the issue persists, see Getting Help .
AMP0303
Message The system board <name> current is greater than the upper
critical threshold.
Details System board <name> current is outside of the optimum
range.
Action
1. Review system power policy.
2. Check system logs for power related failures.
3. Review system configuration changes.
4. If the issue persists, see Getting Help .
ASR0000
Message The watchdog timer expired.
107