Dell PowerVault DR6000 - Manual (Page 83)

7. Grasp the system-board holder, lift the blue release pin and slide the system board toward the front
of the system.
Figure 45. Removing and Installing the System Board
1. system board 2. system-board holder
3. release pin 4. support bracket (present on certain
systems only)
WARNING: The heat sink and processor are hot to the touch for some time after the system
has been powered down. Allow the heat sink and processor to cool before handling them.
8. Remove heat sink(s)/heat-sink blank(s) and processors(s)/processor blank(s).
9. Remove memory modules and memory module blanks.
10. Remove network daughter card.
83