Dell PowerVault DR6000 User Manual

Page 56

8. If you are removing the card permanently, install a metal filler bracket over the empty expansion slot

opening and close the expansion-card latch.

NOTE: You must install a filler bracket over an empty expansion slot to maintain Federal
Communications Commission (FCC) certification of the system. The brackets also keep dust
and dirt out of the system and aid in proper cooling and airflow inside the system.

9. Reinstall the expansion-card riser.
10. Close the system.
11. Reconnect the system to its electrical outlet and turn the system on, including any attached

peripherals.

Figure 25. Removing and Installing the Expansion-Card Riser 1

expansion-card riser 1 cage

2. expansion-card connector

3. expansion card

4. expansion-card latches (2)

Installing An Expansion Card Into The Expansion-Card Riser 1

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.