Dell PowerVault DR6000 - Manual (Page 16)

Entering System Setup
1. Turn on or restart your system.
2. Press immediately after you see the following message:
= System Setup
If your operating system begins to load before you press , allow the system to finish booting,
and then restart your system and try again.
Responding To Error Messages
If an error message is displayed while the system is booting, make a note of the message. For more
information, see System Error Messages.
NOTE: After installing a memory upgrade, it is normal for your system to display a message the first
time you start your system.
Using The System Setup Navigation Keys
Keys Action
Up arrow Moves to the previous field.
Down arrow Moves to the next field.
Allows you to type in a value in the selected field (if applicable) or follow the link in
the field.
Spacebar Expands or collapses a drop-down list, if applicable.
Moves to the next focus area.
NOTE: For the standard graphics browser only.
Moves to the previous page until you view the main screen. Pressing in the
main screen displays a message that prompts you to save any unsaved changes
and restarts the system.
Displays the System Setup help file.
NOTE: For most of the options, any changes that you make are recorded but do not take effect until
you restart the system.
System Setup Options
System Setup Main Screen
NOTE: Unified Extensible Firmware Interface (UEFI) Boot Manager is not supported. BIOS Boot
Manager is the default boot mode.
16