Dell PowerVault NX3600 - Manual (Page 19)

3. Type the FluidFS cluster administrator password at the ’s password prompt.
The default password is Stor@ge!. You are logged on to the CLI and a Welcome window is displayed,
listing the installed FluidFS version and the available commands in the main menu.
Connect to the FluidFS Cluster CLI Through SSH Using a Password
Log on to the CLI through SSH to manage the FluidFS cluster.
1. Use either of the following options:
– Using an SSH client, connect to a client VIP. From the command line, type the following
command at the login as prompt:
cli
– Using a UNIX/Linux workstation, type the following command from a prompt:
ssh cli@
2. Type the FluidFS cluster administrator user name at the login as prompt. The default user name is
Administrator.
3. Type the FluidFS cluster administrator password at the ’s password prompt. The default
password is Stor@ge!. You are logged on to the CLI and a Welcome window is displayed, listing the
installed FluidFS version and the available commands in the main menu.
Connect to the FluidFS Cluster CLI Through SSH Without Using a Password
You can use SSH keys to bypass the SSH login prompt to manage the FluidFS cluster.
1. Log on to a UNIX/Linux workstation for which you want to bypass the SSH login prompt.
2. From the command line, type the following command:
ssh-keygen -t rsa
3. Press Enter at the Enter file in which to save the key (/home//.ssh/id_rsa) prompt.
4. Press Enter at the Enter passphrase (empty for no passphrase) prompt and again at the Enter same
passphrase again prompt. An SSH key is generated at /home//.ssh/id_rsa.pub.
5. Copy the SSH key.
6. Log on to the CLI using a password.
7. Type the following command:
system administrators edit Administrator -SSHKey “”
Now you can use the following command to log on to the FluidFS cluster from the workstation
without needing a password:
ssh @
You can also use the following format to run commands from the workstation without needing a
password:
ssh @
19