Dell PowerVault NX3600 - Manual (Page 58)

NOTE: The NAS controllers must be in standby mode, and powered ON. A NAS controller is ON and
in standby mode if the power LED is flashing green at around 2 flashes per second.
Format
hardware NAS-appliances create-cluster {options}
Options
Option Description Format
-AdditionalNASAppliances
Service Tags of additional NAS
appliances Comma-separated list of existing
Service Tags for additional NAS
appliances
-CurrentApplianceServiceTag
Service Tag of current NAS
appliance Existing Service Tag of NAS
appliance
Example
Create a FluidFS cluster:
CLI> hardware NAS-appliances create-cluster
hardware NAS-appliances blink-appliance
Description
Update the blinking status of a NAS appliance.
Format
hardware NAS-appliances blink-appliance
Arguments
Argument Description Format
ID of the NAS appliance Existing NAS appliance ID
Indicate whether the first NAS
controller of the NAS appliance
should blink Possible values are Yes, No
Indicate whether the second NAS
controller of the NAS appliance
should blink Possible values are Yes, No
Example
Make the first NAS controller blink in a NAS appliance with the ID 1:
CLI> hardware NAS-appliances blink-appliance 1 Yes No
58