System internal diagnostics run-general-diagnostic – Dell PowerVault NX3600 User Manual
Page 137
Example
Run the networking diagnostic for a client with the IP address 172.22.69.18:
CLI> system internal diagnostics run-network-diagnostic 172.22.69.18
system internal diagnostics run-general-diagnostic
Description
Run the general diagnostic. The diagnostic files should be downloaded by FTP from the following
directory:
ftp://
GeneralSystemDiagnostic/
NOTE: FTP is enabled by default on the FluidFS cluster. However, if FTP has been disabled, see
system internal security FTP configuration enable to re-enable FTP before using this command.
Format
CLI> system internal diagnostics run-general-diagnostic
Example
Run the general diagnostic:
system internal diagnostics run-general-diagnostic
system internal diagnostics run-file-system-diagnostic
Description
Run the core file system diagnostic. If the problem occurs only while certain activity is running against the
FluidFS cluster, retry once the diagnostic is run. The diagnostic files should be downloaded by FTP from
the following directory:
ftp://
FileSystemDiagnostic/
NOTE: FTP is enabled by default on the FluidFS cluster. However, if FTP has been disabled, see
system internal security FTP configuration enable to re-enable FTP before using this command.
Format
system internal diagnostics run-file-system-diagnostic
Example
Run the core file system diagnostic:
CLI> system internal diagnostics run-file-system-diagnostic
137