ITC Avoximeter 1000E Whole Blood Oximeter - Manual (Page 33)

ITC AVOXimeter 1000E Operator’s Manual
27
4 Operation
Startup
1. Press . The instrument starts and performs a series of self-tests.
2. “READY” and “Insert Cuvette” are displayed when a test can be run:
3. Run the quality control test(s) for the day (see page 31).
Entering a User ID (Optional)
1. Display the “User and Patient ID” menu (a submenu of , “Data Management,”
see page 8).
2. Press followed by to display the screen for entering the User ID:
3. Enter the User ID, then press . A confirmation screen is displayed.
4. Press followed by , then press three times to return to the “READY”
and “Insert Cuvette” screen.
Entering a Patient ID (Optional)
Note: Although entering a Patient ID is optional, it is strongly recommended. If
Patient ID is not entered, Saturation Step-Ups cannot be computed.
1. Display the “User and Patient ID” menu (a submenu of , “Data Management,”
see page 8).
2. Press followed by to display the screen for entering the Patient ID:
3. Enter the Patient ID, then press .
4. Press three times to return to the “READY” - “Insert Cuvette” screen.