ITC Avoximeter 1000E Whole Blood Oximeter - Manual (Page 27)

ITC AVOXimeter 1000E Operator’s Manual
21
Changing the QA User ID
The default QA User ID is 123456. The default QA User ID can be changed so that only a user
with access to the new QA user ID can change the time and date or change User ID and Patient
requirements.
Important: The User ID for the “QA User” must be entered in order to change the QA User
ID. If the QA User ID is changed, be sure to record the new QA User ID. If the
QA User ID is lost, contact ITC Technical Support for assistance (see page ii).
1. Display the “User and Patient ID” menu (a submenu of , “Data Management,”
see page 8).
2. Press followed by to display the current User ID setting:
Note: User ID: must be ON to proceed.
3. Press followed by to display the “User ID” menu:
4. Press followed by , then respond to the confirmation prompt. The
screen for entering a new User ID is displayed:
5. Enter the new User ID, using the number keys, then press . A confirmation
screen is displayed:
6. Press followed by , then respond to the confirmation prompt. The
“User ID” menu is again displayed.
7. Press to return to the previous menu, if desired.