Setting the standby delay – ITC Avoximeter 1000E Whole Blood Oximeter User Manual
Page 23
ITC AVOXimeter 1000E Operator’s Manual
17
3.
Press
followed by
to change the date:
4.
Use the number keys to enter the new date, then press
. The new date is
displayed.
5.
Press
followed by
. The “Time, Date, and Battery” menu is again
displayed.
6.
Press
to return to the previous menu, if desired.
Setting the Standby Delay
The instrument enters a low-power Standby mode after being inactive for a specified length of
time (the Standby Delay). The instrument is factory preset for a standby delay time of 60 minutes,
but a time of 10 to 180 minutes can be specified.
1.
Display the “Device Settings” menu (a submenu of
, see page 8).
2.
Press
followed by
to display the standby delay (60 minutes is the
factory default value):
3.
Press
followed by
to display the screen for changing the standby delay:
4.
Use the number keys to enter the new standby delay (or disable the standby
delay), then press
. The new standby delay is displayed.
5.
Press
followed by
. The “Device Settings” menu is again displayed.
6.
Press
to return to the previous menu, if desired.