Navigation – NISSAN 2015 Murano - Navigation System Owner's Manual User Manual
Page 102

6. Navigation
current vehicle location.
.
[By Category]:
Display the list that summarizes the listed
names into categories. Select the cate-
gory to narrow down the search.
INFO:
.
Touch [ i ] on the list screen to display the
detailed information about the POI that is
selected on the touch screen display.
6. A map of the selected place is displayed.
Touch [Start] to start route guidance.
INFO:
. To search for a POI with two or more words,
touch [Space] to enter a space between
each word.
. After setting a destination, the location of the
destination can be adjusted and the location
can be stored in the Stored Location, etc.
“Options before starting the route
guidance” (page 6-23)
Voice command
1. Push <
> located on the steering wheel.
2. After the tone sounds, speak a command.
Use the following voice command to search for
Points of Interest from a facility name:
“Points of Interest
*: This voice command operation is available only
when the language setting is set to English.
Searching Points of Interest by cate-
gory
1. Touch [Navi] on the Launch Bar.
2. Touch [Points of Interest]. The main category
menu is displayed.
3. Touch the main category. The subcategory
list is displayed.
4. Touch the subcategory. Narrow down con-
dition screen is displayed.
5. Touch the narrow down category.
Search conditions:
.
[By Name]:
Enter the name of the facility
.
[Select a City]:
Input the city to narrow down the target
city.
.
[Near Current Location]:
Facilities near the current vehicle location
are displayed in a list.
.
[Near Destination]:
When the destination is set, this indicates
a list of facilities around the destination.
6. Touch the preferred destination facility from
the list.
Touch [Start] to start route guidance.
INFO:
. Subcategories may not be displayed de-
pending on the selected main category.
. If there is no nearby POI, a message asking
whether to search from an extended area will
be displayed. When [Yes] is selected, the
system starts to search for POI in a wider
area.
6-18