Dell 2335DN - Manual (Page 66)

You can load approximately 250 sheets of plain paper in the tray 1 or the optional tray 2. If you purchased
the optional tray 2, see
"Installing an Optional Tray 2" for installing instructions. For faxing, you can use A4,
letter or legal paper only. For copying or printing, you can use many different types and sizes of paper; see
"Identifying Print Media Sources and Specifications" .
Follow these instructions to load print media into the tray 1 or optional tray 2. These trays are loaded the
same way.
Pull open the paper tray and load paper with the print side face down. 1.
You can load letterhead paper with the design side face down. The top edge of the sheet with the logo
should be placed at the front side of the tray.
For details about loading paper in the paper tray, see "Loading Paper" .
NOTE: If you experience problems with paper feed, place the paper in the MPF.
NOTE: You can load previously printed paper. The printed side should be facing up with an uncurled
edge at the front. If you experience problems with paper feed, turn the paper around. Note that the
print quality is not guaranteed.
Using the MPF (Multi purpose feeder)
Use the MPF to print transparencies, labels, envelopes or postcards in addition to making quick runs of paper
types or sizes that are not currently loaded in the paper tray.
Postcards, 3.5 by 5.83 in. (index) cards and other custom-sized materials can be printed with this printer.
The minimum size is 3.0 by 5.0 in. (76 by 127 mm) and the maximum size is 8.5 by 14 in. (216 by 356
mm).