Network authorized user by ldap – Dell 2335DN User Manual
Page 129

6.
Network authorized user by LDAP
You can use not only local addresses stored in your machine's memory but also ones in the LDAP server. To
use the global addresses, configure the LDAP server first via Embedded Web Service as following:
Enter your machine's IP address as the URL in a browser and click Go to access the web site of your
machine.
1.
Click Email Settings
LDAP Server Setup .
2.
Enter the IP address in dotted decimal notation or as a host name.
3.
Enter the server port number, from 1 to 65535.
4.
The default port number is 389.
Enter Search Root Directory . The top search level of the LDAP directory tree.
5.
Enter your Login Name , Password , Maximum Number of Search Results , and Search Timeout
.
6.
See "Email Settings" for network parameters.
NOTE:
LDAP Referral : LDAP client will search referral server in case LDAP server has no data to
reply of query and LDAP server has any referral server.
Click Submit .
7.
Available Options for LDAP Server
Option
Description
LDAP
Server Setup
LDAP Server
and Port
Specifies the LDAP server address in IP
address format of "aaa.bbb.ccc.ddd" or as a DNS
host name up to 63 characters.
And specifies the LDAP server port number up
to 15 alphanumeric characters.
Search Root
Directory
Enter the top search level of the LDAP
directory tree.
Authentication
method
Specifies the authentication method for
outgoing LDAP server.
Append Root
to Base DN
Check if it is needed to append base DN at
the end of the user DN.
Login Name
Specifies the LDAP account user name. Up to
63 alphanumeric characters, periods, hyphens,
under bars, and at symbols (@) can be used. If
specifying more than one address, separate them
using commas.