Dell 2335DN - Manual (Page 54)

hazardous emissions. Check with the paper manufacturer or vendor to determine whether the paper you
have chosen is acceptable for laser printers.
Unacceptable Paper
The following papers are not recommended for use with the printer:
Chemically treated papers used to make copies without carbon paper, also known as carbonless
papers, carbonless copy paper (CCP), or no carbon required (NCR) paper
Preprinted papers with chemicals that may contaminate the printer
Preprinted papers that can be affected by the temperature in the printer fuser
Preprinted papers that require a registration (the precise print location on the page) greater than
0.09 in., such as optical character recognition (OCR) forms
Coated papers (erasable bond), synthetic papers, thermal papers
Rough-edged, rough or heavily textured surface papers or curled papers
Recycled papers containing more than 25% post-consumer waste that do not meet DIN 19 309
Recycled paper having a weight less than 60 g/m 2 (16 lb)
Multiple-part forms or documents
Selecting Paper
Proper paper loading helps prevent jams and ensures trouble-free printing.
To help avoid jams or poor print quality:
Always use new, undamaged paper.
Before loading paper, know the recommended print side of the paper you are using. This information is
usually indicated on the paper package.
Do not use paper that you have cut or trimmed yourself.
Do not mix print media sizes, weights, or types in the same source; mixing results in jams.
Do not use coated papers.
Remember to change the paper size setting when you use a source that does not support auto size
sensing.
Do not remove trays while a job is printing.
Ensure that the paper is properly loaded in the source.
Flex paper back and forth. Do not fold or crease the paper. Straighten the edges on a level surface.