Setting the time out option, Setting the default mode, Setting the toner save mode – Dell 2335DN User Manual
Page 28
Setting the Time Out Option
You can set the time the printer waits before it restores the default copy or fax settings, if you do not start
copying or faxing after changing the settings on the operator panel.
Press Scroll ( or ) to highlight Setup and then press Select (
).
1.
Press Scroll (
or
) to highlight Machine Setup and then press Select (
).
2.
Press Scroll (
or
) to highlight Timeout and then press Select (
).
3.
Press Scroll (
or
) to display the timeout value you want.
4.
The available time options are 15, 30, 60 and 180 (seconds).
You can select from 15, 30, 60 and 180 (seconds). Selecting Off means that the printer does not
restore the default settings until you press Start (
) to begin copying or faxing, or Cancel
(
) to cancel.
Press Select (
) to save the selection.
5.
Press Cancel (
) to return to the Standby mode.
6.
Setting the Default Mode
Your machine is preset to Fax mode. You can switch this default mode to Copy mode or Scan mode.
Press Scroll ( or ) to highlight Setup and then press Select (
).
1.
Press Scroll (
or
) to highlight Machine Setup and then press Select (
).
2.
Press Scroll (
or
) to highlight Default Mode and then press Select (
).
3.
Press Scroll (
or
) to display the mode you want.
4.
Press Select (
) to save the selection.
5.
Press Cancel (
) to return to the Standby mode.
6.
Setting the Toner Save Mode