Dell 2335DN User Manual
Page 152
To enter the TCP/IP setting from your printer's operator panel, take the following steps:
Press Scroll ( or ) to highlight Setup and then press Select (
).
1.
Press Scroll (
or
) to highlight Network Setup and then press Select (
).
2.
Press Scroll (
or
) to select the network protocol you want to use and then press Select (
).
3.
If you selected TCP/IP (IPv4) .
Press Scroll (
or
) to select IPv4 Activate and then press Select (
).
a.
Press Scroll (
or
) to change the setting to On (enable) or Off (disable).
b.
If you selected TCP/IP (IPv6) .
Press Scroll (
or
) to select IPv6 Activate and then press Select (
).
a.
Press Scroll (
or
) to change the setting to On (enable) or Off (disable).
b.
Press Cancel (
) to return to the Standby mode.
d.
Static Addressing
To enter the TCP/IP address from your printer's operator panel, take the following steps:
Press Scroll ( or ) to highlight Setup and then press Select (
).
1.
Press Scroll (
or
) to highlight Network Setup and then press Select (
).
2.
Press Scroll (
or
) to highlight TCP/IP (IPv4) and then press Select (
).
3.
Press Scroll (
or
) to highlight Set IP Address and then press Select (
).
4.
The first available menu item, Manual , appears and then press Select (
).
5.
The first available menu item, Set IP Address displays.
6.
Press Select (
) to access the IP Address menu.
7.
8.