Dell 2335DN - Manual (Page 266)

Condition Suggested solutions
d_LDAP_MAX_QUERY_EXCEEDED There exists limitation for number of
results from the LDAP server for each LDAP
query.
The range for the number of results is
0~100.
Set the query between 1 and 100.
d_LDAP_SVR_AUTH_FAIL If a device has invalid credential (ID or
PW), LDAP server will return authentication
failure message.
d_LDAP_QUERY_FAILED If a user presses the STOP key during the
search and no data was returned before
cancelling, the device will display this message.
d_LDAP_NO_SUCH_ATTRIBUTE Result is depending on the query from the
device.
If a user sees this error message,
changing the query can avoid this situation.
d_LDAP_ADDR_NOT_FOUND This case is happening only when
connection was successful and search result was
nothing.
d_LDAP_SVR_NOT_FOUND It could be a wrong IP address setup or
Server is not working correctly.
Administrator can suspect the physical
condition, device (client) configuration and
server status.
In case of device configuration,
administrator should check IP address or
hostname or port number.
d_LDAP_TIMELIMIT_EXCEEDED It only happens when server is returning
error code=8 which means "Server Time-out".
When server couldn't return all search
result within the timeout.
This is abnormal case which is depending
on the server side condition though.
A user can test server operation with other
queries.
Common Windows Problems