Amico Falcon Combo Arm User Manual

Page 6

6 Amico Accessories Inc.

Typical Installation Reference

The picture below illustrates the components referenced in relation to one another in the installation of the FIT
STATION. Please follow the instructions outlined herein to ensure proper installation.

FIT Station

1. Swivel Post (Pg.34)

For mounting and positioning of monitor

2. Extension Arm (Pg.27)

extension arm to increase movement range of AHM (if applicable)

3. Mounting Adapter(Pg.7-14)

Different mounting adapters will be provided based on the rail system used

4. Cable Management (Pg.19-24)

Manage cables for the FIT Station for a clutter free environment

5. Height Locking Lever (Pg.25) (Not Shown)

Locks arm at desired height,

6. Counter Balance Bolt (Pg.26)

Balance the weight of the monitor on the AHM arm of the FIT station

7. Negative Tilt Knob (Pg.30)

Tilts the keyboard tray’s back downwards for proper ergonomics in certain cases

8. Keyboard Tray (Pg.17-18) (2 x mousepad, 12 x dual lock coins provided; wrist rest if purchased)

Location for Keyboard & Mouse

9. Rail System (Pg.7-14)

For mounting the FIT station, varies depending on user’s selection. Rail is packed separately and must be

installed first.

10. VESA Head (Pg.28-29)

For mounting the monitor

11. Mouse/Scanner Holder (Pg.16)

For storing mouse and hand-held scanners.

12. CPU Mount (Pg. 7-13) (Not Shown)

For Mounting CPU for FIT station.

SECTION 1: Installation Preparation