Amico Falcon Combo Arm User Manual

Page 22

22 Amico Accessories Inc.

SECTION 3: Device Installation

ARS Rail Cable Management

NOTE:

An ARS cable guide is available to facilitate routing of cables along the Rails and is not provided by default

with the FIT Station.

1. Depending on where your CPU is mounted, guide the cables from the FIT station into the side of the channel

leading to your CPU. (Figure 1)

2. Depending on where your electrical outlets are, guide the power cables from the FIT station into the side of the

channel leading to your electrical outlets. (Figure 1)

3. Guide the ARS rail cable cover into the channel over the cable. Ensuring no cable is pinched between the rail

and the cover. Safely trim off any excess MRS cover after installation.

(Figure 1)