Amico Falcon Combo Arm - Manual (Page 18)

18 Amico Accessories Inc.
Keyboard and Mouse Mounting
1. Place keyboard onto the keyboard tray, place the mouse into the mouse holder, ensure the end with the cable
faces up. Follow cable management procedures to route the cables through the FIT on page 19/22.
NOTE: To secure the keyboard to a magnetic keyboard tray, place the magnetic keyboard onto the part of the
tray with metallic inserts.
2. To secure the keyboard to a regular keyboard tray or as an additional securing method for the magnetic
keyboard, use the dual locking coins provided.
3. Place any other accessories into their respective holders/areas and route cables according to the procedures
provided in the cable management section on page 19/22.
(Figure 1)
(Figure 2)
Dual Lock
coins
(Figure 3)
(Figure 4)
SECTION 3: Device Installation
a. Take the strip of dual locking coins (Figure 1) provided, remove backing and place 6 on the keyboard,
spaced evenly (Figure 2).
b. Take the remaining 6, remove backing and place them onto the 6 already attached to the keyboard
(Figure 3).
c. Place it on the keyboard tray and press down hard while supporting the bottom of the keyboard tray, the
keyboard can now be attached and detached from the keyboard tray (Figure 4).