Amico Falcon Combo Arm - Manual (Page 19)

www.amico.com 19
Wrist Rest Mounting
NOTE: Wrist rest is available but not provided with the FIT Station by default.
1. To secure the wrist rest to a keyboard tray, use the dual locking coins provided. Follow the instructions on the
previous page to attach the twelve (12) dual locking coins to the wrist rest.
2. Position the wrist rest on the keyboard tray behind the handle (Figure 1), follow the step 3 on the previous page
to install the wrist rest onto the keyboard tray using the dual-lockig coins.
(Figure 1)
Mousepad Mounting
1. Take a mousepad, peel off the adhesive release (Figure 2).
2. Choose a side of the keyboard tray to use as a mousing surface. Pull out the mousetray from that side and attach
the mousepad to it by sliding it into the side of the keyboard until the inside edge of the mousepad disappears,
and the entire mousepad is resting on the mouse tray, then press it onto the mousetray (Figure 3).
(Figure 2) (Figure 3)
SECTION 3: Device Installation