Amico Falcon Combo Arm - Manual (Page 33)

www.amico.com 33
4. Rotate the arm towards the desired side of the channel. (Figure 1)
5. For a folding extension, hold the extension arm against the wall, and then pivot the AHM back towards the
channel until it rotates another 180 degrees. (Figure 2)
6. Rotational tension can be adjusted by tightening/loosening the bolts located at the joints of AHM/extension
arms. Remove the caps to access the bolt before adjusting (Figure 1).
(Figure 1)
(Figure 2)
Bolt
Caps
SECTION 4: Adjustments