Typical yp825ar planter weights (metric models), Transport steps – Great Plains YP825AR Operator Manual User Manual
Page 28
24
YP825AR
Great Plains Manufacturing, Inc.
401-923M
2014-06-17
Typical YP825AR Planter Weights (Metric Models)
Transport Steps
Transport only with markers stowed (page 50).
1.
Check that planter is securely hitched to a sufficient
tractor (page 14).
2.
Always use a locking-style hitch pin sized to match
holes in hitch and draw-bar (minimum 1 inch / 2.5 cm
diameter, heat-treated pin).
3.
Attach safety chain to tractor with enough slack to
permit turning (page 14).
4.
Verify correct operation of lights.
5.
Fold markers if unfolded (Option, page 50).
6.
Fold planter (page 35).
7.
Unload hoppers and tank(s) before transporting.
8.
If any seed is in hoppers or delivery hoses, close
seed inlet shutters at meters (page 78).
9.
Check that tires are properly inflated (page 134).
10. Plan the route. Avoid steep hills.
11. Always have lights on for highway operation.
12. Do not exceed 32 kph (20 mph). Comply with all
national, regional and local laws when traveling on
public roads.
13. Remember that the planter may be wider than the
tractor. Allow safe clearance.
14. Transport slowly in turns, over uneven or rough
terrain.
Approximate Weights of
YP825AR
YP825AR
YP825AR
Representative Configurations
-0870
-0875
-16TR75
Minimum Empty
4400 kg
4400 kg
5300 kg
(Transport)
(9700 pounds)
(9700 pounds)
(11600 pounds)
Maximum Empty
4700 kg
4700 kg
6000 kg
(Transport)
(10400 pounds)
(10400 pounds)
(13200 pounds)
Minimum Full
5900 kg
5900 kg
7500 kg
(Field)
(13100 pounds)
(13100 pounds)
(16400 pounds)
Maximum Full
8500 kg
8500 kg
10300 kg
(Field)
(18600 pounds)
(18600 pounds)
(22800 pounds)
Note: Weight of a specific planter can vary by hundreds of pounds or kg depending on installed options and material loaded.