Great Plains YP825AR Operator Manual - Manual (Page 10)

6 YP825AR Table of Contents Index Great Plains Manufacturing, Inc.
401-923M Table of Contents Index 2014-06-17
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request
corresponding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-055C
Slow Moving Vehicle Reflector
On the right end of the opener frame, facing rear in
transport;
1 total
34746
838-266C
Red Reflectors
Below the lights on the right end of the opener frame,
on the rear face of the outside seed hoppers:
4 total
34787