Great Plains YP825AR Operator Manual - Manual (Page 24)

20 YP825AR Table of Contents Index Great Plains Manufacturing, Inc.
401-923M Table of Contents Index 2014-06-17
Wheel Adjustment for Beds
Refer to Figure 11
For planting on beds, tool bar and row unit height may be
raised by:
1
1 ⁄
2
inches (38.1 mm)
by relocating the wheels in the gauge wheel arms.
Block up the frame to remove weight from tires. Remove
bolts
and lock washers from the standard center
holes . Move each wheel assembly to the lower
holes and re-secure with removed bolts and washers.
Note: Never use the top/upper holes . These holes are
not for field or highway use.
Monitor Setup
Prior to first use, the chosen seed monitor must be set up
for the planter configuration, and the ground speed
calibrated. Thereafter, the monitor materials, rates and
any field prescriptions need to be se up for each planting
session.
Consult the Monitor Quick Start Guide
(401-923M-QSG) manual for monitor operations.
Marker Setup (Option)
Prior to first use, check and adjust:
• “Marker Speed Adjustment” on page 150.
Prior to first use, and whenever changing row spacings,
set or reset:
• “Marker Extension” on page 151.
Prior to each planting session, check and adjust:
• “Marker Disk Adjustment” on page 55.
Figure 11
Gauge Wheel Height
34697
4
5
2
1
3
4 5
1 2
3
Figure 12
Supported Monitors
32487
34255
34698