Great Plains YP825AR Operator Manual - Manual (Page 126)

122 YP825AR Table of Contents Index Great Plains Manufacturing, Inc.
401-923M Table of Contents Index 2014-06-17
Dual Sequenced Markers
A marker system includes hydraulic cylinder, marker arm
and mount for left and right side, plus an automatic
sequence valve that controls which side activates, and at
what speed. The marker system shares the lift circuit.
The system is factory installed, but ordered as a
separate line item.
See “Marker Operations” on page 36.
Frame-Mounted Row Accessories
Frame-Mounted Coulters
Frame-mounted coulters are independent of unit-
mounted coulters. The planter may have both, either or
neither. Frame-mounted coulters may be used in-row or
as “zone” coulters, offset from rows.
Vantage I Coulters
Vantage I is a disk coulter with liquid fertilizer applicator.
A fertilizer system required for use of the applicator.
Vantage I for Liquid Fertilizer (17 inch Turbo blades)
Vantage I for Dry Fertilizer (18 inch Turbo blades).
a. Ordering information was not final at publication of this manual edition. Contact your Great Plains dealer.
Description
Order
Number
8-30 PT PLTR FLAT FOLD MKR Note
a
29872
Vantage I Liquid Part Number
8-Row for Single-Row (8 coulters) 417-032A
8-Row for Twin-Row (16 coulters) 417-033A
Vantage I Dry Part Number
8-Row for Single-Row (8 coulters),
all row spacings except 75 cm
417-028A
8-Row for Single-Row (8 coulters),
75 cm row spacing
417-030A
8-Row for Twin-Row (16 coulters), all
row spacings except 75 cm twin row
417-029A
8-Row for Twin-Row (16 coulters),
75 cm twin row spacing
417-031A
22951
34745
2
1
1
2