Great Plains YP1625A Operator Manual - Manual (Page 26)

22 YP1125A & YP1625A Table of Contents Index Great Plains Manufacturing, Inc.
401-625M Table of Contents Index 2013-08-13
Fully Unfold
Refer to Figure 18
11. Unfold the planter fully to planting position. Unfolding
is complete when the large roller bushing on top of
the tongue is engaged by the tongue safety latch
.
Planter Damage Risk:
Failure to lower the tongue before unfolding WILL result in
opener or seed delivery system damage. Press wheel assembly
components can strike air system components near the air box
manifold.
Planter Damage Risk:
Do not plant if the tongue latch is not fully down over the
roller. Frame and opener damage is likely if the planter is
operated with the latch open.
Remove and Store Transport Locks
The planter needs to still be in full lift to remove these
locks.
Remove/Store Center Lift Locks
Refer to Figure 19
12. Remove lock channels
from vertical cylinders
above pivots.
Refer to Figure 19 and Figure 20
13. Store lock channels horizontally on tabs
at top
right side of lift cylinder weldment.
Figure 18
Tongue Latch Engaged
28488
9
9
Figure 19
Frame Lift Locks
29738
1
2
2
1
Figure 20
Lift Cylinder Lock Stored
29736
2
2